NEW Ultimate 64 Light Strip Angled Mount for the 64c

Note: This mount is only for the regular Ultimate 64.  If you have an ELITE, and would like this angled mount, please purchase this ELITE VERSION.  It is the same price but works better with the ZIF sockets.

This is a new mounting system for the optional RGB controllable 24 LED light strip for inside the 64c case. This mounting design attaches to the top of the metal shield surrounding the cartridge port. It is recommended that you put a couple small pieces of doublesided tape on each side of the top of the metal shield when you set the bracket in place.  This will prevent it from moving around.  Unfortunately the doublesided tape doesn't travel well, so you'll need to supply that bit of tape.

We also have 24 LED strips for the Ultimate 64. These are neatly soldered and both conductive ends are protected with heatshrink. The cable is 40cm long, and +5v is identified on every cable to ensure it is properly connected. The connector is wired to match our breakout board as follows: (+5V, CLKI, SDI, GND). This is the same pinout as found on the new v1.4 boards by Gideon Zweijtzer. (Pin: 1 2 3 4 | GND DAT CLK 5V) Care must be taken to ensure the LED strip is plugged in the proper orientation otherwise damage to your board will occur.


The breakout board if you need one can be found here: CLICK HERE



Note that the light strip, is not included with the mount, you need to obtain one, or purchase it from us separately.

Ultimate 64 Light Strip Angled Mount for 64c case

  • Product Code: U64LSAMNT
  • Availability: In Stock
  • $16.95

  • Ex Tax: $16.95

Available Options


Available Filament Colors

Scroll through the available colors.

Natural Translucent
Purple
Grey
Orange
Pink
Pine Green
Magenta
Brown (Dark Chocolate)
Black
Green (Dark Translucent)
Gold
Peak Green
Blue (Dark Translucent)
Red
Light Blue
Yellow
Glow in the Dark Blue
White
Silver